Rishat Sayeed
- Here's a quick guide on automated factory building & optimal layouts in Arknights: Endfield.
- Pin Power Relays to the Boundary
- Smelt Raw Chunks at the Extractors
- Adopt a Single-Direction Main Bus
- Loop Surplus Outputs to Central Storage
- FAQ
Here's a quick guide on automated factory building & optimal layouts in Arknights: Endfield.
Skimping on your outpost layout on Talos-II bites hard the moment high-tier gear projects open up. Trying to cobble together an Automated Industry Complex in Arknights: Endfield on the fly leaves your operators starved for basic ammo and construction blocks.
You can't just slap down fabricators on flat dirt and pray logistics sort themselves out. Untangling crossed conveyor tracks in mid-game is pure misery, so plan your plots before sinking credits into your first depot.
Pin Power Relays to the Boundary
Every assembler and crusher pulls heavy wattage from your central Protocol Anchor Core. Run your substations and power relays strictly along the dirt perimeter instead of cluttering the open yard.
Poles stuck right in the middle choke walking room and butcher long belt runs. Keep electrical lines against the border so you can snake straight production lines without having to demolish your grid later.
Smelt Raw Chunks at the Extractors
Hauling rough Originium ore and ferrium rocks across the territory drags your supply lines down to a crawl. Drop electric smelters right beside the mining heads so rocks turn into workable ingots the second they leave the ground.
Raw rocks stack poorly and plug machine input hoppers twice as fast as refined bars. Smelting at the extraction node means your long-distance transport tracks only carry clean, high-density plates.
Adopt a Single-Direction Main Bus
Line up your crafters in parallel rows facing one direction, leaving two open tiles between tracks. Pull ingots off a single feeder spine using splitters, then dump finished parts out the backside onto an outbound belt.
A straight spine setup prevents the spaghetti loops that choke factory floors and cause sudden jams. When tier-two recipes unlock, just tack another machine onto the tail end of the row and keep rolling.
Loop Surplus Outputs to Central Storage
Assemblers stall out cold the instant their internal output trays hit capacity. Run your outbound belts straight into a main storage depot with overflow lines routed back into base stockpiles. Clean buffers keep components churning off the line while you are away clearing combat zones in the Blight.
Mastering factory layouts comes down to perimeter wiring, refining at the mines, and running everything along one straight bus into storage.
FAQ
Q. Why are my crafters sitting idle with full power?
A. Check the output tray; full item buffers shut the machine down until the exit belt clears the clutter.
Q. How do I stop belts from turning into spaghetti?
A. Feed everything along one wide central spine and pull parts sideways into machines with splitters.
Q. Should I smelt materials inside the base or outside?
A. Build smelters right beside field extractors so you never drag raw rock across your building zones.
Also, check out our Arknights: Endfield Review and other guides below:
