- Here's how to link a city tram loop to a heavy rail line in Transport Fever 3.
- Pick a Quiet Rail Line for Light Rail in Transport Fever 3
- Connect a Tram-Only Road to the Rail Line in Transport Fever 3
- Build the Light Rail Line
- Add a Station as a Tram Stop
- Check for Light Rail Trams in Transport Fever 3
- Move Existing Trams Onto the Line
- What to Do Next
- FAQ
- Q. Can ordinary trams use train tracks in Transport Fever 3?
- Q. Do I need to rebuild my city roads for light rail?
- Q. Can light rail trams stop at train stations?
- Q. Can regular trains run on the tram network in Transport Fever 3?
Here's how to link a city tram loop to a heavy rail line in Transport Fever 3.
A quiet train line between two towns can lose money while each town runs a busy tram loop. Transport Fever 3 lets some trams leave the street and run on that rail line, so the trams can fill the gap. The steps below build that link.
Pick a Quiet Rail Line for Light Rail in Transport Fever 3
In one test, each of two cities had a tram loop that passed its airport and train station. A train line joined the cities, but one train on it carried only 11 passengers and lost money.
The line had two trains, so one was sold and the other kept. That left a low line rate between the cities, and the trams were set to cover the difference.

Connect a Tram-Only Road to the Rail Line in Transport Fever 3
Open the street menu and scroll past the Small Streets to the Tram Tracks piece at the end. Cars can't use it, so it works as a tram-only link.
Lay a short stretch of it from the tram route toward the rail line. In one test, the nearby street needed no upgrade with the spanner tool for this link.
In Transport Fever 3, rail track with catenary, the overhead wire, can run straight out of the tram-only road and join the main line. That join lets trams move between the two networks. Keep catenary on every stretch of rail the trams will use, stations included.
Plug the new track into the main line and add a basic crossover so trams can reach both tracks. The junction in the test was a quick demonstration, so plan a cleaner layout for a real line. Repeat the same link at the far city.

Build the Light Rail Line
Open the Line Manager and create a new line. Click the tram stops in the first city in order, then follow the rail track to the second city and click its tram stops. Return the same way to close the loop.
Trams on this line then use the train tracks. Leave the existing city tram lines in place so each city keeps its local service.
Add a Station as a Tram Stop
Transport Fever 3 lets a station on the rail line serve as a light rail stop, and a short one is enough. In one test, an 80 m station worked, and a shorter one could work for trams.

To make a station look like a tram stop, remove the roofs and the main entrance. Keep the underpass and add a small entrance on the side.
Reconnect the tracks, then open the line again. Add the station after the last stop before the tram leaves the city. Add it again after the last stop on the way back.
Check for Light Rail Trams in Transport Fever 3
Transport Fever 3 lists standard trams and light rail trams together in the tram depot. Only the trams marked Light Rail can use rail track, so check each one before you buy or assign it.
On the street, a light rail tram follows normal road rules. On rail, it follows the usual signals and track reservations, according to the developers. In one test, a tram ran beside the heavy trains with no trouble.

Move Existing Trams Onto the Line
Trams already marked Light Rail can move to the new line, so you may not need to buy more. In one test, two local lines ran clockwise and anticlockwise with four trams in total. Reassign trams to the new line from the Line Manager. In that test, each local loop kept one tram.
What to Do Next
Look for two towns in Transport Fever 3 that already have tram loops and a quiet train line between them. Build the tram-only link and the catenary track at both ends, then draw one line through both cities. Check the Light Rail icon on every tram before it joins the line. After any road edit near the link, check the line's stops again.
Link the tram loops with a tram-only road and catenary track, then run only light rail trams through both cities.
FAQ
Q. Can ordinary trams use train tracks in Transport Fever 3?
A. Only trams marked Light Rail in the tram depot can run on rail track. Check the icon before you assign a tram to the line.
Q. Do I need to rebuild my city roads for light rail?
A. Only the link to the rail line needs a new piece of tram-only road. In one test, the nearby street needed no spanner upgrade.
Q. Can light rail trams stop at train stations?
A. Yes, add the station to the line twice, once on the way out and once on the way back.
Q. Can regular trains run on the tram network in Transport Fever 3?
A. A developer said before launch that none of the base-game trains can run on tram track. A modded train set up as light rail reportedly can.
Also check out our Review of the game and other guides below:
- Transport Fever 3 Review
- Transport Fever 3: Beginner Guide to Get Started
- Transport Fever 3: Shortcuts and Tools That Save Time
- Transport Fever 3: Build Stations and Cargo Lines That Scale
- Transport Fever 3: Split One Load Across Multiple Stops
- Transport Fever 3: How to Fix Tram Lines After Road Changes






